To Next PageTo Next PageWhy does the limit switch shut down my Newmac Furnace?
If the limit switch shuts down your Newmac Furnace, it's often due to insufficient return air supply or an obstruction, such as a rug covering a supply air grill. Ensure adequate airflow to prevent this issue.
What to do if the draft fan does not operate on my Newmac CL 86-96G?
If the draft fan on your Newmac Furnace isn't working when the solid fuel thermostat is turned up, check the following: 1. Power supply. 2. Voltage on the secondary side of the control relay transformer. 3. Wiring connections. 4. Voltage at the fan motor. If all these check out, the fan itself may be defective.
Lists furnace models, package contents, and general specifications.
Covers foundation, leveling, and initial setup for the furnace.
Details required clearances and flue pipe connection requirements.
Illustrates the physical locations and setup of control components.
Step-by-step instructions for installing firebricks and grates.
Step-by-step guide for operating the furnace with oil and solid fuel.
Instructions for oil burner maintenance, fuel, and operational cautions.
Guidance on starting, maintaining, and managing wood and coal fires.
Procedures for cleaning the heat exchanger, flue pipe, and chimney.
Critical safety and operational guidelines for homeowners.
Details specifications and wiring diagrams for various burner models.
Steps for initiating and testing the gas burner.
Lists part numbers for common replacement components.
Guidelines and procedures for integrating air conditioning units.
Checklist for initial appliance testing and service data.
Terms, conditions, and coverage of the Newmac limited warranty.
General
