Newpoint COMPASS 4 - Stopping and Starting Compass Administrator

Newpoint Technologies, Inc. COMP-USER-006
Salem, NH 03079 Rev. 3.2 –01/31/01
51
Stopping and Starting Compass Administrator
Open Newpoint Compass using one of the following methods:
• RECOMMENDED: Click on the Compass Administrator
icon placed on your Desktop during installation or
• Select Programs/Compass from the Windows NT Start menu,
or
• Click on the Start menu button, select Programs/Command
Prompt to access the command prompt. Enter fepadm.
Before you exit the Newpoint Compass Administrator, close all open
windows, and bring the current node to Stop state. Click on File /
Exit to close the Administrator and to return to the Windows NT
Desktop.