Newpoint Technologies, Inc. COMP-USER-006
Salem, NH 03079 Rev. 3.2 –01/31/01
About this Guide
This Guide provides information and procedures required to install
and configure Newpoint Compass software.
Objectives
With the assistance of this manual, you will be able to:
q install all components of Newpoint Compass version 3.0
q locate the install directories for all components
q complete initial configuration tasks
q obtain further information and assistance from Newpoint
Technical Support
Intended Audience
This manual provides information suitable for system operators and
integrators who are tasked with maintenance and customization of a
device-based monitor and control system. The successful end-user of
Newpoint Compass and related documentation will have a solid
understanding of the devices and technologies that are configured in
the system. Windows NT-related topics are not discussed in detail;
please refer to Microsoft documentation for detailed procedures and
concepts.
To Next Page
Loading...