XPS Motion Controller/Driver Quick Start
2.5.3 Stages Configuration for Newport Stages (Auto-Configuration)
For Non Newport stages, please refer to the XPS
User’s Manual.
1. Open your web browser (as Internet
Explorer) and connect to:
http://192.168.0.254
The welcome web page appears. Fill the
following fields:
Name: Administrator
Password: Administrator
Rights: Administrator
2. Click “ENTER”.
3. Click on AUTO-CONFIGURATION menu
then “Generate Configuration files” button.
The XPS controller is now rebooting, you can
close the web browser.
2.5.4 Using Stages
1. Open your web browser (as Internet
Explorer) and connect to:
http://192.168.0.254
Fill the following fields:
Name: Anonymous
Password: Anonymous
Rights: User
2. Click “ENTER”.
3. Click on the FRONT PANEL menu then
Move submenu. Use the “Action” button to
initialize and home each group. For any
motion, type the absolute value and click on
the corresponding “Go” button.
Now you have done the first step and you are
ready to use more complex features with the XPS
controller.
To achieve this, please read the XPS User’s
Manual.
EDH0205En1051 – 10/17 8
To Next Page
Loading...
Need help?
General
