Newport XPS User Manual

XPS Controller
Universal High-Performance
Motion
Controller/Driver
Quick Start

Newport XPS Specifications

General

Controller Type	Multi-axis motion controller
Power Supply	24 VDC
Communication Interface	Ethernet
Programming Language	C, C++, .NET, LabVIEW
Supported Motor Types	Stepper
Operating System Compatibility	Windows
Axes	Up to 8 axes

Summary

XPS Controller Warranty Information

Introduction to the XPS System

Safety Warnings and Symbols

Electric Shock Hazard Symbol

General Safety Precautions

Essential Operating Safety Precautions

Lists crucial safety measures to be observed during all phases of operation.

Getting Started Procedures

Unpacking and Handling the XPS Controller

Inspecting for Shipping Damage

Instructions for inspecting the equipment and its packaging for any signs of damage.

XPS Controller System Setup

Installing XPS Controller Driver Cards

Details the process and important rules for installing driver cards into the controller.

Powering On and Connecting the XPS

XPS Controller Power On Procedure

Step-by-step guide for powering on the XPS controller and understanding its indicators.

Direct PC Connection Method

Explains how to connect the XPS controller directly to a PC using a crossover cable.

Ethernet Card Configuration

Configuring IP and Subnet Mask (Windows XP)

Step-by-step instructions for setting up Ethernet card addresses in Windows XP.

Stage Configuration and Operation

Auto-Configuration for Newport Stages

Guides on using the web interface for auto-configuring Newport stages.

Basic Stage Movement

Describes how to initialize and move stages using the web interface.

XPS Controller Documentation Overview

Programmer's Manual for Advanced Users

Introduces the programmer's guide, covering APIs, functions, and examples.