PRESET
ID84 Page 7 / 20
PRESET
Please consult nexo-sa.com for NEXO TD Controllers firmware information.
For optimal acoustic performance, follow these rules:
• Always use at least 1x ID84.
• Never assemble more than 4 cabinets.
• Never use more than 2x ID84 or 2x ID84L in a column assembly.
• 2xID84 can only be coupled upside-down for HF section continuity.
• Never link an ID84L to the top of an ID84.
For the ID84, the following setups are available:
→ NARROW: directivity 0° / -10°.
→ BROAD: directivity 0° / -25°.
Preset
• ID84 BROAD, with high pass at 90 or 120 Hz.
• ID84 NARROW, with high pass at 90 or 120 Hz.
For the ID84L, the following setups are available:
→ NARROW: use when next to an ID84 in NARROW mode.
→ BROAD: use when next to an ID84 in BROAD mode or when not directly attached to an ID84.
Preset
• ID84L BROAD, with high pass at 90 or 120 Hz.
• ID84L NARROW, with high pass at 90 or 120 Hz.
1x ID84
To Next Page
Loading...
