Next OPUS - Page 2

1. Stand and spread the frame fully as illustrated.
NB: The spreadable angle for the frame can't
exceed 90 degree.
1. Attach panels (2),(3),(4),(5)&(6) to the frame
with 20×screws (A) by an allen key (B) until tight.
Please note:Screw all the panels in one side of frame
first then continue assembling the panels to the other
side of the frame.
1. Use 20×stickers (C) to cover the screw holes.
STEP ONE
FITTINGS
PARTS
STEP THREE
STEP TWO
Page 2 of 6