If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0844 844 8999
• Keep fittings out of children’s reach and keep children well away from construction area.
• Foam is supplied to protect the front face. Do use the foam to protect the main face during assembly.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
• Carefully check that you have all the parts before beginning assembly.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• Regular cleaning is essential to avoid build up of these products on the surface.
• Care should be taken to avoid spilling anything on the upholstery. If a spillage occurs act promptly and soak up any
liquids by blotting with a clean absorbent cloth. Never rub to remove stains. Never use a wet cloth.
• Avoid exposure to direct or prolonged periods of sunlight and position away from direct heat sources such as
radiators.
• If a spillage does occur, blot any liquids immediately with a clean, dry absorbent cloth and allow to dry naturally.
• Hair products such as hairsprays, oils and gels may affect the finish. Avoid prolonged contact with such products.
• Clean periodically in situ using a professional cleaning company.
• For more stubborn stains a professional upholstery cleaner should be consulted.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
To Next Page
Need help?
General
