Need help?Do you have a question about the Nextav cloudhub x100 and is the answer not in the manual?
Connects the NEXTAV Cloud Hub to your existing wireless router for internet pass-through.
Connects the device via Ethernet cable to a router for wired internet pass-through.
Specifies the physical dimensions of the NEXTAV Cloud Hub device.
Details the CPU, Wi-Fi standards, speed, and power consumption of the device.
Outlines the normal and non-operating temperature and humidity ranges for the device.
Connects USB storage for WiFi access and charges mobile devices up to 1.5A.
Micro USB 2.0 port for charging the internal battery up to 1A current.
Functionality of the reset button for factory default settings.
Explains the status indicated by the WiFi LED and Battery LED lights.
Allows the Wi-Fi device to act as a host, assigning IP addresses for network connections.
Instructions on inserting USB Mass Storage devices into the device's USB port for use.
To Next Page
General