NextBase 380GW

DASH CAM SETTINGS (CONTD.)DASH CAM SETTINGS (CONTD.)
Video menu continued:
7. Time & Date Stamp
Turn On / Off the time and date stamp shown on recorded files.
Options: Off and On
Default Setting: On
8. Speed Stamp
Turn On / Off the Speed Stamp shown on recorded files.
Options: On and Off
Default Setting: On
9. GPS Location Stamp
Turn On / Off the GPS co-ordinates that are shown on recorded files. When a recording is
viewed using the supplied NEXTBASE Replay playback software the GPS co-ordinates remain
available.
Options: On and Off
Default Setting: On
10. Model Number Stamp
Turn On / Off the Model Number shown in the bottom left corner of recorded files.
Options: On and Off
Default Setting: On
11. G Sensor
Turn off or adjust the sensitivity of the built in G Sensor. The G Sensor detects forces which
will automatically protect the current recording in event of a collision.
Note:
- This does not affect Parking mode sensitivity.
Options: High, Medium, Low and Off
Default Setting: Medium
41