DASH CAM SETTINGS (CONTD.)DASH CAM SETTINGS (CONTD.)
Setup menu continued:
2. Format SD Card
Format the inserted memory card. This will delete all content upon the SD card.
The SD card can also be formatted by pressing and holding the Protect button for 6 seconds,
the yellow LED indicator will flash (quickly) during formatting.
Note:
- For stable performance, it is recommended that you format the memory card
every 2 weeks.
Of course, you should only do this AFTER you've downloaded any files from the
card that you may want to keep.
3. Time
This setting allows you to set the Time manually, if required during initial setup.
Note:
- The time will be overwritten when there is a subsequent satellite connection.
4. Date
This setting allows you to set the Date manually, if required during initial setup.
Note:
- The date will be overwritten when there is a subsequent satellite connection.
5. Time Zone
The Time and Date are automatically set from the satellite signal, but can be adjusted dependent
upon your Time Zone or whether Daylight Savings Time is operational.
6. Country
Select your current Country, this will then automatically adjust the Time Zone / DST setting
to your Time Zone, i.e. if France is selected the Time Zone will become GMT +1.
If your required Country is not available, select ‘Other’. This will take you to the
‘Time Zone’ menu, from there you can manually select your Time Zone.
Options: United Kingdom, Belgium, Denmark, Finland, France, Germany, Italy, Netherlands,
Norway, Poland, Spain, Sweden and Other
Default Setting: United Kingdom
7. Speed Units
Select whether to record and display speed in KMH or MPH.
Options: MPH and KMH
Default Setting: MPH
43
To Next Page
Loading...
Need help?
General
