DRIVING RECORDER PLAYER FOR WINDOWS
This section will guide you through the installation of the Driving Recorder Player software, designed to
enable the viewing of recorded files as well as checking journey route / GPS data (location and speed)
and G Sensor information.
MINIMUM SYSTEM REQUIREMENTS:
Operating System: Windows XP, Vista, Windows 7, Windows 8
Processor (CPU): Pentium III 500 MHz or Celeron at 800 MHz
Memory: 1 GB RAM
Storage: 100Mb Internal hard drive space
CD-ROM Drive: Tray / Slot Loader
Monitor/Display: 1280 x 1024
Windows Driving Recorder Player:
Insert the supplied Driving Recorder Player disk in to the CD drive, navigate and display the contents
upon the disk:
- NBDVR402G Instruction Manual
Multiple Languages available
- NBDVR402G Driving Recorder Player for Windows
- NBDVR402G Driving Recorder Player for Mac
Note:
The instruction manual, installation guide and installation files are all available for download from
the Nextbase website: www.nextbase.co.uk, if required.
21
Should you experience any difficulties during installation please do not hesitate to
call our English speaking technical support team on +44 (0)2920 866429,
lines are open during normal business operating hours: 09:00-17:30hrs.
To Next Page
Loading...
Need help?
General
