VIDEO MODE (CONTD.)
Video Menu
The Video Menu is accessed by pressing the MENU button whilst in video mode.
The default settings have been carefully selected to allow you to use the Dash Cam without the
need to change any settings. However, should you wish to change a setting then please see below.
Use the up and down buttons to highlight the function that you'd like to change and press the OK
button to enter the settings sub-menu.
Once in the sub-menu, use the up and down buttons to highlight the required setting and then press
OK to confirm your selection and return to the Video Menu.
Press the MENU button twice to return to video mode.
Note:
- Menus are not accessible whilst the Dash Cam is recording.
1. Resolution
Select recording resolution of the High resolution file, this will increase or decrease the quality
of the recorded video.
Options: 1080P, 720P and 720P 60FPS
Default Setting: 1080P
2. Exposure
Adjust exposure level for different light conditions.
Options: +2, +1, 0, -1 and -2
Default Setting: 0
Video Menu
Resolution
Exposure
Audio Recording
Number / Licence Plate
Back
MENU
Enter
OK
Video Length
18
To Next Page
Loading...
Need help?
General
