FIRST TIME USE
To ensure the set up of this Dash Cam is as quick and simple as possible, there is an easy to follow
‘First Time Use’ menu.
This menu is used to set your preferred Language, Country (this defines your time zone) and speed
units.
The menu is available when -
1) The Dash Cam is first turned on.
2) There has been a Firmware update applied to the Dash Cam.
3) After the Dash Cams settings have been reset, by using the ‘Defaults Settings’ option
within the Setup Menu.
Simply follow the on screen instructions to select the Language, Country and Speed Units.
The settings that influence the displayed time & date will be applied upon receiving a GPS connection.
Note:
- Whilst the First Time Use menus adjust the settings within the Dash Cam, the settings can still be
adjusted thereafter, by using the normal Setup Menu options. Changing country location is one
such example of a change you could make, after the First Time Use setup.
16
To Next Page
Loading...
Need help?
General
