To Next Page

To Previous Page

PHOTO MODE (CONTD.)

Photo Menu

The Photo Menu is accessed by pressing the MENU button whilst in photo mode.

The default settings have been carefully selected to allow you to use the Dash Cam without the

need to change any settings. However, should you wish to change a setting then please see below.

Use the up and down buttons to highlight the function that you'd like to change and press the OK

button to enter the settings sub-menu.

Once in the sub-menu, use the up and down buttons to highlight the required setting and then press

OK to confirm your selection and return to the Photo Menu.

Press the MENU button twice to return to photo mode.

1. Exposure

Adjust exposure level for different light conditions.

Options: +2, +1, 0, -1 and -2

Default Setting: 0

2. Time & Date Stamp

Turn On / Off the time and date stamp shown on images.

Options: On and Off

Default Setting: On

Note:

- Within the Setup Menu which is accessed by pressing the MENU button twice, there is

a ‘Default Settings’ option to allow you to reset the Dash Cam to the factory defaults,

if required.

Photo Menu

Exposure

Time & Date Stamp

Back

Enter

NextBase Mirror User Manual

Questions and Answers: