1
Accessories
USB Cable AC/DC Adaptor
Buttons & Ports
Step by Step to Get Started
STEP 1 Charge the Battery
Connect the DC adaptor to Micro-USB port of the
unit through the USB cable, and then insert the
DC adaptor to a standard socket.
Note:
It takes about 4.5 hours to fully charge the battery. The
charge indicator should light up in orange once the
battery is fully charged.
Charging through USB connection with computer is extremely slow and may take a few more hours. You
are strongly recommended to charge with the provided power adaptor.
7.85” Capacitive Touch Android Tablet
Quick Start Guide
NX785QC8G
Ver.1.0
G. Charge indicator
H. Front webcam
I. Display
J. VOL+ button – Increase
the volume.
K. VOL- button – Decrease
the volume.
L. Rear webcam
M.
Built-in speakers
A. Earphone socket – connects to
stereo earphones.
B. Micro USB /DC-IN Port –
connects to PC or power adaptor.
C. HDMI interface
D. TF Card Slot
E. Built-in microphone
F. Power –Briefly press to lock or
unlock the screen; press and hold
to turn on or off the unit or reset it.
To Next Page
