5.4. External power supply
The camera can be operated using power from an
external power supply. A 6 V power supply with at
least 1.5 A is required containing a connector with
a 3.5 mm external and 1.35 mm internal diameter
(internal plus pole, external minus pole).
Rechargeable batteries cannot be recharged in the
camera using an external power supply.
12
5.5.
Assembly with strap
Use the securing strap supplied to attach the Wildlife Camera to a tree or another object. The illustrations
below demonstrate how to fasten the securing strap.
Position the Wildlife Camera as desired and pull the loose end of the securing strap tight until the camera is
rmly secured.
To release the securing strap again, pull at the tab of the securing strap.
To Next Page
Loading...