NextGen BytePipe x9002 - Kit Contents; Figure 1: Developer Kit Contents

To Next Page

To Previous Page

DOC-1017 Rev. A1 Page | 4

Kit Contents

The HDK can be purchased with or without a SOM. If purchased with a SOM, the kit will arrive with the SOM

preinstalled and is ready to be used right out of the box. If purchased separately, the SOM will need to be

properly installed on the HDK prior to use.

 Developer Kit Main Board

 BytePipe SDR SOM Module (Optional)

 6 – SOM RF Interconnects

 SOM Heatsink and Fan

 Power Supply

 USB Cables

 Ethernet Cable

 Micro-SD Card with Pre-Installed Software

 6 Hours NextGen RF Engineering Support

 SOM Mounting Hardware (HDK/SOM combo kits only)

Figure 1: Developer Kit Contents