Nexx X-com - 6.1 Mobile Phone Pairing; 6.2 Multipoint Pairing; 6.3 Phone Selective Pairing; 6.4 Media Selective Pairing

English
X-COM
11
6.1 Mobile Phone Pairing
Voice Prompt
“Phone pairing”
Factory Default N/A
To go into mobile phone pairing mode, tap the (+) Button or the (-)
Button until you hear the voice prompt, “Phone pairing”. Please
refer to section 7.1 for details on mobile phone pairing. If you tap
the (+) or the (-) Button, you can exit from the phone pairing mode.
6.2 Multipoint Pairing
Voice Prompt
“Multipoint pairing”
Factory Default N/A
To go into multipoint pairing mode, tap the (+) Button or the (-)
Button until you hear the voice prompt, “Multipoint pairing”. Please
refer to section 7.2 for details on multipoint pairing. If you tap the
(+) or the (-) Button, you can exit from the multipoint pairing mode.
6.3 Phone Selective Pairing
Voice Prompt
“Phone selective pairing”
Factory Default N/A
To go into phone selective pairing mode, tap the (+) Button or
the (-) Button until you hear the voice prompt, “Phone selective
pairing”. Please refer to section 8 for more details on phone
selective pairing. If you tap the (+) Button or the (-) Button, you
can exit from the phone selective pairing mode.
6.4 Media Selective Pairing
Voice Prompt
“Media selective pairing”
Factory Default N/A
To go into media selective pairing mode, tap the (+) Button or
the (-) Button until you hear the voice prompt, “Media selective
pairing”. Please refer to section 8 for more details on media
selective pairing. If you tap the (+) Button or the (-) Button, you
can exit from the media selective pairing mode.