English
X-COM
13
6.7 Enabling/Disabling Voice Activated Intercom
Voice Prompt
“VOX intercom”
Factory Default Disable
Enable / Disable Tap the Center Button
Tap the (+) Button or the (-) Button until you hear the voice prompt,
“VOX intercom”. If this feature is enabled, you can initiate an
intercom conversation with the last connected intercom friend
by speaking any word loudly enough. If you start an intercom
conversation by VOX, the intercom terminates automatically when
you and your intercom friend remain silent for 20 seconds.
6.8 Setting Intercom VOX Sensitivity
Voice Prompt
“VOX sensitivity”
Factory Default 3
Level Adjustment
Tap the (+) Button or the (-) Button
(1 ~ 4)
Apply Tap the Center Button
Tap the (+) Button or the (-) Button until you hear the voice prompt,
“VOX sensitivity”. By tapping the Center Button, it will lead you
to the level adjustment mode. If you enter the mode, you will hear
a prompt stating the current VOX sensitivity level. You may adjust
the VOX sensitivity level by tapping the (+) Button or the (-) Button.
Level of 4 is the highest sensitivity setting and 1 the lowest. After
you have completed the setting, tap the Center Button to apply
the changes.
6.9 Enabling/Disabling Voice Prompts
Voice Prompt
“Voice prompt”
Factory Default Enable
Enable / Disable Tap the Center Button
You can disable voice prompts by configuration setting, but the
following voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset
6.10 Enabling/Disabling Sidetone
Voice Prompt
“Sidetone”
Factory Default Disable
Enable / Disable Tap the Center Button
Sidetone is the sound of your own voice as picked up by your
headset’s microphone and reproduced in your own ear, by your
To Next Page
Loading...