Nexx XCOM3 - Pairing the Headset with Other Bluetooth Devices; Phone Pairing; The First Time You Turn on the Headset

X.COM3 - MOTORCYCLE BLUETOOTH COMMUNICATION SYSTEM
17
4
PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
When using the headset with other Bluetooth devices for the rst time, they
will need to be “paired.” This enables them to recognize and communicate
with one another whenever they are within range.
The headset can pair with multiple Bluetooth devices such as a mobile
phone or GPS via Mobile Phone Pairing, Second Mobile Phone Pairing
and GPS Pairing.
4.1 PHONE PAIRING
There are three ways to pair the phone.
4.1.1 The First Time You Turn On the Headset
The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situation:
• Rebooting after executing Factory Reset; or
• Rebooting after executing Delete All Pairings.
1. Press and hold the Center Button and the (+) Button for 1 second.
1s
HOLD
Blinking
“Phone pairing”
2. Select X-COM 3 in the list of
Bluetooth devices detected.
X-COM 3
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap any button.