WF1943B 5-1
Section 5 Other Operations
5.1 Convenient Settings ···································································································5-2
Frequency [Hz] setting by period [s]··································································5-2
Squarewave duty setting ····················································································5-3
Squarewave pulse width setting ·········································································5-4
Amplitude and DC offset setting by high and low level ·····································5-5
5.2 Units ··························································································································5-7
Engineering unit (µ, m, k, M) display ································································5-7
Amplitude units change ·····················································································5-8
User-unit setting·································································································5-9
5.3 Setting memory··········································································································5-13
Setting store ·······································································································5-13
Setting recall ······································································································5-14
Setting memory clear ·························································································5-15
5.4 Other settings·············································································································5-16
Output range change (use with fixed range)·······················································5-16
Output on/off at power on··················································································5-17
LOAD function (equalize setting and output values) ·········································5-18
UNDO function··································································································5-19
Pulse generator function·····················································································5-20
Phase initialization·····························································································5-22
・Following is a typical example of the display panel indications used in this Section.
Fully lighted(bold) Dimly lighted
ＦＲＥＱ
ＰＥＲＩＯＤ ＡＭＰＴＤ
4
ＵＳＥＲ ＵＮＩＴ：ＴＹＰＥ ＮＡＭＥ ＦＯＲＭＵＲＡ
4
Fully lighted(bold) Flashing Dimly lighted
To Next Page
Loading...
