Contents
WF1943B Contents 3
z Section 5 Other Operations··················································································································5-1
5.1 Convenient Settings ········································································································ 5-2
Frequency [Hz] setting by period [s]·······································································5-2
Squarewave duty setting ·························································································5-3
Squarewave pulse width setting ··············································································5-4
Amplitude and DC offset setting by high and low level ··········································5-5
5.2 Units ······························································································································· 5-7
Engineering unit (µ, m, k, M) display ·····································································5-7
Amplitude units change ··························································································5-8
User-unit setting······································································································5-9
5.3 Setting memory···············································································································5-13
Setting store ············································································································ 5-13
Setting recall ···········································································································5-14
Setting memory clear ······························································································ 5-15
5.4 Other settings··················································································································5-16
Output range change (use with fixed range)····························································5-16
Output on/off at power on ······················································································· 5-17
LOAD function (equalize setting and output values) ··············································5-18
UNDO function·······································································································5-19
Pulse generator function··························································································5-20
Phase initialization··································································································5-22
z Section 6 Troubleshooting···················································································································6-1
6.1 Error message ·················································································································6-2
Power on error ········································································································6-2
Operation error········································································································ 6-3
6.2 Suspected failure·············································································································6-6
In case of abnormality·····························································································6-6
z Section 7 Maintenance·························································································································7-1
7.1 Outline····························································································································7-2
Work contents·········································································································7-2
Required test instruments························································································7-2
7.2 Operation checks ············································································································7-3
Preparatory checks··································································································7-3
Function checks ······································································································ 7-3
To Next Page
Loading...
