EasyManua.ls Logo

NGTeco NG-RV2100 - Fault Condition Handling; Resetting WiFi Connection

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fault Condition
When an abnormality occurs in the operation of the sweeping robot, the cleaning key
indicator light flashes slowly and gives voice prompts. See "Troubleshooting" for the solution.
· No operation for 10 minutes, and the sweeping robot sleeps automatically.
· The sweeping machine is charged on the charging seat, and will end the cleaning task.
Resetting WiFi
When the router changes the configuration, forgets the password or other reasons for the
sweeping robot, please hold the cleaning and recharge keys at the same time until hear the
voice prompt "Reset WiFi to enter the distribution network", release the button, and wait for
the button indicator orange slow flash, indicating that the sweeping robot has entered the
distribution network mode.
·After the robot is waiting for more than 1 hour, the WiFi function will be automatically turned
off. If you want to connect again, please reset WiFi before operation.
Suction Adjustment
You can adjust the suction power to quiet level, standard level, powerful level, super level by
mobile APP or remote control (standard level by default).
Water Regulation (only for 2-in-1 E-water tank)
You can regulate the water flow to lower level, middle level, high level or shut off the water
by mobile APP or remote control ( middle level by default).
Silent Mode
You can open the silent mode via mobile APP, the robot will turn off its voice prompt.
16
Instructions for Use