Instructions for Use
15
On/Off button
Start/Pause cleaning
Note:
- The robot vacuum cleaner cannot be used to remove liquids.
- If the battery level is less than 15%, the robot cannot work, then please charge it.
- The machine will return to the charging base automatically if the battery level is less than 15% in
use and will be powered off and start cleaning automatically after the battery level reaches 80%.
- Please clear various wires (including power line of charging station) on the ground before use so
as to avoid outage and damage of the objects or wires when wires are dragged by the robot.
Dormancy
After more than 10 minutes without operation, the sweeping robot will automatically enter
the dormant state, when the cleaning indicator light goes off. Press the cleaning button to
wake up the robot.
· The robot will not enter dormancy while charging on the charging seat.
· The sweeping robot automatically shuts down when the dormant time is less than 5%.
After the robot turned on, short press the button on the host machine or use mobile APP to
start/pause cleaning. (Press any key in APP to pause cleaning)
1. Long press the button for 3s until the indicator lights is steady on, the robot voice prompt
"Power On". Robot is turned on successfully.
2. While the machine is in standby state, long press the button for 3s until the indicator
light turn off, robot voice prompt " Power off" .
Robot cannot be shut down when it is in charging.Note:
Charging
Automatic Recharge:
The robot will return to the charging station automatically after completing cleaning.
Manual Mode:
1. Short press the button on the robot to start recharging.
2. Press the home key on APP to start recharging.
Note:
- Orange and blue indicator light is under breathing status while charging, Indicator light will
be steady on when charging is full.
- If the robot fails to locate the charging station, it will return to the place around original
position automatically. Please put the robot back to the charging station manually.
To Next Page