Notice In order to meet the EMC requirements for
marine applications, install the model in a shielded
enclosure with shielded and/or filtered power and
input/output ports. In addition, take precautions when
designing, selecting, and installing measurement probes
and cables to ensure that the desired EMC performance
is attained.
Physical Characteristics
If you need to clean the module, wipe it with a dry towel.
Tip For two-dimensional drawings and three-
dimensional models of the C Series module and
connectors, visit ni.com/dimensions and search by
module number.
Screw-terminal wiring
Gauge 0.2 mm
2
to 2.5 mm
2
(26 AWG
to 14 AWG) copper conductor
wire
Wire strip length 13 mm (0.51 in.)
12 | ni.com | NI 9215 Getting Started Guide
To Next Page
Loading...
Need help?
General
