Safety Compliance and Hazardous Locations
Standards
This product is designed to meet the requirements of the
following electrical equipment safety standards for measurement,
control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA C22.2 No. 61010-1
• EN 60079-0, EN 60079-15
• IEC 60079-0: Ed 6, IEC 60079-15; Ed 4
• UL 60079-0; Ed 6, UL 60079-15; Ed 4
• CSA C22.2 No. 60079-0, CSA C22.2 No. 60079-15
Note For UL and other safety certifications, refer to
the product label or the Product Certifications and
Declarations section.
NI 9215 Getting Started Guide | © National Instruments | 9
To Next Page
Loading...
