NI CB-68LP - User Manual

USER GUIDE
NI CB-68LP/CB-68LPR
Unshielded 68-Pin Screw Terminal Connector Block Accessories
The National Instruments CB-68LP and CB-68LPR are unshielded I/O accessories with
68 screw terminals for easy signal connection to a National Instruments 68-pin DAQ device.
Caution The CB-68LP/CB-68LPR accessory must be installed inside a suitable
enclosure prior to use.
Caution Before using this unshielded accessory, determine if the documentation
for the connected device requires shielded cables or accessories to ensure its specified
EMC performance. If the connected device requires shielded cables or accessories,
do not use this product unless it is installed in a shielded enclosure with properly
designed and shielded input/output ports and connected to the NI product using a
shielded cable.
Figure 1. CB-68LP/CB-68LPR Parts Locator Diagram
1 Screw Terminals 2 68-Pin I/O Connector 3 Metal Standoff Foot
1
3
2
1 2
3
S/N
ASSY183030D–01
COO
ASSY184700D–01
S/N
CB–68LPR
CB– 68LP
FOR PATENTS: NI.COM/PATENTS

NI CB-68LP Specifications