NI CB-68LP/CB-68LPR User Guide | © National Instruments | 5
Safety Voltages
Connect only voltages that are no greater than 30 V
rms
/42 V
pk
/60 VDC.
Environmental
Temperature
Operating ..................................................0 to 70 °C
Storage......................................................-20 to 70 °C
Relative humidity
Operating ..................................................5 to 90% RH, noncondensing
Storage......................................................5 to 90% RH, noncondensing
Pollution Degree...............................................2
Maximum altitude.............................................2,000 m
Indoor use only.
Caution The protection provided by the DAQ device and the CB-68LP/CB-68LPR
can be impaired if it is used in a manner not described in this user guide and the user
documentation for your DAQ device.
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible
manner. NI recognizes that eliminating certain hazardous substances from our products is
beneficial to the environment and to NI customers.
For additional environmental information, refer to the Minimize Our Environmental Impact web
page at
ni.com/environment. This page contains the environmental regulations and
directives with which NI complies, as well as other environmental information not included in
this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers At the end of the product life cycle, all products must be sent to
a WEEE recycling center. For more information about WEEE recycling centers,
National Instruments WEEE initiatives, and compliance with WEEE Directive
2002/96/EC on Waste and Electronic Equipment, visit
ni.com/environment/
weee
.
⬉ᄤֵᙃѻક∵ᶧࠊㅵ⧚ࡲ⊩ ˄Ё
RoHS
˅
Ёᅶ᠋
National Instruments
ヺড়Ё⬉ᄤֵᙃѻકЁ䰤ࠊՓ⫼ᶤѯ᳝ᆇ⠽䋼ᣛҸ
(RoHS)
DŽ݇Ѣ
National Instruments
Ё
RoHS
ড়㾘ᗻֵᙃˈ䇋ⱏᔩ
ni.com/
environment/rohs_china
DŽ
(For information about China RoHS compliance,
go to
ni.com/environment/rohs_china
.)
To Next Page
Loading...
