Need help?Do you have a question about the NI 9203 and is the answer not in the manual?
Specifies the maximum voltage limits for connecting to the device's COM terminal.
Outlines suitability for Class I, Division 2, and Zone 2 hazardous locations.
Provides cautions for disconnecting wires, removing modules, and component substitution.
Details ATEX and IECEx certifications and suitability for Zone 2 locations.
Specifies requirements for transient disturbances, pollution degree, and enclosure ratings.
Specifies the maximum voltage limits for connecting to the device's COM terminal.
Outlines suitability for Class I, Division 2, and Zone 2 hazardous locations.
Provides cautions for disconnecting wires, removing modules, and component substitution.
Details ATEX and IECEx certifications and suitability for Zone 2 locations.
Specifies requirements for transient disturbances, pollution degree, and enclosure ratings.
General| Input Type | Current |
|---|---|
| Input Range | ±20 mA |
| Resolution | 16 bits |
| Operating Temperature Range | -40 °C to 70 °C |
| Category | I/O Systems |
| Maximum Input Range | ±20 mA |
| Isolation | 250 Vrms |
| Single-Ended/Differential | Single-Ended |
| Isolation Voltage | 250 Vrms |
To Next Page
