NI USB-9162 - User Manual

USER GUIDE
NI USB-9162
Portable Bus-Powered USB Carrier for NI C Series I/O Modules
This user guide describes how to use the National Instruments USB-9162 and lists
specifications.
Figure 1. NI USB-9162 and C Series I/O Module
Safety Guidelines
Operate the NI USB-9162 only as described in these operating instructions.
Hot Surface This icon denotes that the component may be hot. Touching this
component may result in bodily injury.
Safety Guidelines for Hazardous Voltages
If hazardous voltages are connected to the module, take the following precautions. A hazardous
voltage is a voltage greater than 42.4 V
pk
or 60 VDC to earth ground.
Caution Ensure that hazardous voltage wiring is performed only by qualified
personnel adhering to local electrical standards.
Caution Do not mix hazardous voltage circuits and human-accessible circuits on
the same module.
Caution Make sure that devices and circuits connected to the module are properly
insulated from human contact.
Hi-Speed USB Carrier
NI USB-9162

Summary

Safety Guidelines

Safety Guidelines for Hazardous Voltages

Precautions for handling hazardous voltages connected to the module and wiring.

Electromagnetic Compatibility Guidelines

Unpacking

Setting up the NI USB-9162 Carrier

LED Indicator

Specifications

Power Requirements

Details on current consumption from USB and suspend mode for the NI USB-9162 carrier.

Bus Interface

Specifies the USB interface standard used by the NI USB-9162 carrier.

Physical Characteristics

Details on the weight and dimensions of the NI USB-9162 carrier.

Safety Voltages

Information regarding safe voltage limits for isolation and withstand ratings.

Environmental

Hazardous Locations

Safety

Electromagnetic Compatibility

CE Compliance

Online Product Certification

Environmental Management

Waste Electrical and Electronic Equipment (WEEE)

Related Documentation

Where to Go for Support

NI USB-9162 Specifications

General

Brand	NI
Model	USB-9162
Category	I/O Systems
Language	English