NI R Series Getting Started Guide

1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Notice Never touch the exposed pins of connectors.
Note Do not install a device if it appears damaged in any way.
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Verifying the Kit Contents
Verify that the following items are included in the NI PXIe-7865 kit.
Figure 1. NI PXIe-7865 Kit Contents
3
2
1
1. Hardware
2. NI-RIO Media
3. Getting Started Guide
Installing Software on the Host Computer
Before using the NI PXIe-7865, you must install the following application software and device
drivers on the host computer.
1. LabVIEW 2019 SP1 or later
2. LabVIEW Real-Time Module 2019 or later
1
3. LabVIEW FPGA Module 2019 or later
4. NI R Series Multifunction RIO Device Drivers January 2020 or later
Visit ni.com/info and enter the Info Code softwareversion for minimum software support
information.
1
LabVIEW Real Time Module is only required when the R Series board is used in a chassis where
the PXIe Controller is running a real-time operating system.
2 | ni.com | NI PXIe-7865 Getting Started Guide

NI R Series Specifications

General

Brand	NI
Model	R Series
Category	I/O Systems
Language	English