Compressor (CM)
2 screws (short)
Rear panel
7 screws (short)
1 screw (long)
Side panel
4 Remove the nine and one
long screw.
5 Remove the side panel and
the rear panel.
6 Remove the top section of
the compressor insulation.
7 Remove the nut and re-
move the connection protec-
tion.
9 Remove the gasket.
8 Disconnect the compressor
wiring, U (red), V (white) and
W (blue).
NIBE AMS10Chapter 7 | Component replacement72
To Next Page
Loading...
