Nibe F110 - Heat Pump Operational Cycle

Side panels
Air treatment section
1.
Undo the screws at the edge.
2.
Twist the cover slightly outward.
3.
Move the side cover outwards and backwards.
4.
Assembly takes place in the reverse order.
LEK
LEK
LEK
Heater section
1.
Undo the screws at the edge.
2.
Twist the cover slightly outward.
3.
Move the side cover outwards and backwards.
4.
Assembly takes place in the reverse order.
LEK
LEK
LEK
9Chapter 2 | Delivery and handlingNIBE™ F110