Transport
Transport
F110 should be transported and stored vertically in a
dry place. However. the F110 may be carefully laid on
its back when being moved into a building. The centre
of gravity is in the upper part.
Assembly
■
Position F110 on a firm base that can take the weight,
preferably on a concrete floor or foundation. Use the
product's adjustable feet to obtain a horizontal and
stable set-up.
■
The area where F110 is located must be equipped
with floor drainage.
■
F110 must be positioned with the back towards a
wall. Install F110 with its back to an outside wall,
ideally in a room where noise does not matter, in
order to eliminate noise problems. If this is not pos-
sible, avoid placing it against a wall behind a bed-
room or other room where noise may be a problem.
■
Wherever the unit is located, walls to sound sensitive
rooms should be fitted with sound insulation.
■
Route pipes so they are not fixed to an internal wall
that backs on to a bedroom or living room.
5Chapter 2 | Delivery and handlingNIBE™ F110
2 Delivery and handling
To Next Page
Loading...
