Nibe F110 - The heating installation - the heart of the house

Removing the covers
Air treatment hatch
LEK
1
2
3
4
1.
Slacken off the screws for the securing plate above
F110.
2.
Slide the hatch upwards and pull it towards you.
3.
Pull the hatch towards yourself.
NOTE
A ground cable is installed in the hatch, it can
therefore only be lifted out 0.35 m. If the hatch
needs to be removed completely, the cable
must be detached.
Front cover
Remove the front hatch by pulling it straight out.
LEK
NOTE
A display cable is installed in the hatch, it can
therefore only be lifted out 1.5 m. If the hatch
needs to be removed completely, the cable
must be detached.
NIBE™ F110Chapter 2 | Delivery and handling8