Nibe F370 - 4 Disturbances in comfort; Info menu; Manage alarm

You can also set the time over which (filtering time) the average temper-
ature is calculated. If you select 0, the present outdoor temperature is
used.
Caution
It cannot be set "stop additional heat" higher than "stop heating".
factory setting user
Do you want to reset all user settings to
factory settings?
factory setting user4.9.4
yes
no
All settings that are available to the
user (including advanced menus) can
be reset to default values here.
Menu
4.9.4
Caution
After factory setting, personal set-
tings such as heating curves, ventil-
ation etc must be reset.
schedule blocking
The compressor can be scheduled to be blocked for up to two different
time periods here.
Menu
4.9.5
When scheduling is active the actual blocking symbol in the main menu
on the heat pump symbol is displayed.
activated
schedule 2schedule 1
all
mon
tues
we
thur
fri
sat
sun
schedule blocking 4.9.5
Time period BlockingDay
Activated
Schedule
Conflict
Schedule: The period to be changed is selected here.
61NIBE™ F370Chapter 3 | F370 – at your service