Maintenance of NIBE FLM
REGULAR CHECKS
Your exhaust air module requires minimal maintenance after commis-
sioning. On the other hand, it is recommended that you check your in-
stallation regularly.
If NIBE FLM is installed with a compatible heat pump and something
untoward occurs, a message appears regarding the malfunction in the
form of various alarm texts in the heat pump display.
Cleaning the ventilation devices
The building’s ventilation devices should be
cleaned regularly with, for example, a small
brush to maintain the correct ventilation.
The device settings must not be changed.
NOTE
If you take down more than one
ventilation device for cleaning, do not
mix them up.
Cleaning the air filter
Clean the NIBE FLM's air filter regularly, how often depends on the
amount of dust in the ventilation air. Select what is most suitable for
your installation.
Caution
The efficiency of the installation can be impaired by a dirty air
filter.
If NIBE FLM is connected to a compatible heat pump, you receive a re-
minder to clean the filters in the display. The default setting for the re-
minder is every three months; however, if the power to the heat pump
is interrupted, the countdown starts from zero again.
NIBE FLMChapter 2 | The heating installation – the heart of the house10
To Next Page
Loading...
