Program settings
Program setting of POOL 40 can be performed via the
start guide or directly in the menu system.
Start guide
The start guide appears upon first start-up after heat
pump installation, but is also found in menu 5.7.
Menu system
If you do not make all settings via the start guide or need
to change any of the settings, this can be done in the
menu system.
Menu 5.2 - system settings
1)
Activating/deactivating of accessories.
1) Applies to NIBE F1145/F1155 and F1245/F1255.
Menu 5.2.3 docking
2)
Setting the system docking.
2) Applies to NIBE F1345/F1355 and SMO 40.
Menu 5.2.4 - accessories
2)
Activating/deactivating of accessories.
2) Applies to NIBE F1345/F1355 and SMO 40.
Menu 4.1.1 - pool
Activating pool heating and setting start and stop tem-
perature.
Menu 5.1.11 - pump speed heating medium
Setting heating medium pump's speed.
Caution
Also see the Installation manual for the product
that POOL 40 will be connected to.
Technical specifications
POOL 40
230 V 50 HzControl voltage
8,6kV
s
value
28Connection valve (Ø mm)
067 062Part No.
POOL 40 | GB22
To Next Page
Loading...
