Symbols
Explanation of symbols that may be present in this manual.
CAUTION!
This symbol indicates danger to person or machine.
NOTE!
This symbol indicates important information about
what you should observe when maintaining your
installation.
TIP!
This symbol indicates tips on how to facilitate us-
ing the product.
Serial number
The serial number can be found on the rear cover and at the
bottom on the side.
NOTE!
You need the product's (14 digit) serial number for
servicing and support.
Country specific information
UNITED KINGDOM
This installation is subject to building regulation approval,
notify the local Authority of intention to install.
Use only manufacturer’s recommended replacement parts.
For more information see www.nibe.co.uk.
Warranty and insurance information
Thank you for installing a new NIBE heat pump in your home.
NIBE heat pumps are manufactured in Sweden to the very
highest standard so we are pleased to offer our customers
a comprehensive guarantee.
The product is guaranteed for 24 months for parts and la-
bour from the date of installation or 33 months from the
date of manufacture, whichever is the shorter.
The NIBE guarantee is based on the unit being installed and
commissioned by a NIBE accredited installer, serviced every
year and the Benchmark documents completed. Where this
condition is not met, any chargeable spare parts or compon-
ents issued within the applicable guarantee period still be-
nefit from a 12 month warranty from the date of issue by
the manufacturer.
We recommend the installer completes and returns as soon
as possible, your guarantee registration card or completes
the guarantee form on the NIBE website, www.nibe.co.uk
Please ensure that the installer has fully completed the
Benchmark Checklist in the end of the Installation Instruc-
tions supplied with the product and that you have signed
to say that you have received a full and clear explanation of
its operation. The installer is legally required to complete a
commissioning checklist as a means of complying with the
appropriate Building Regulations (England and Wales).
All installations must be notified to Local Area Building
Control either directly or through a Competent Persons
Scheme. A Building Regulations Compliance Certificate will
then be issued to the customer who should, on receipt, write
the Notification Number on the Benchmark Checklist.
This product should be serviced regularly to optimise its
safety, efficiency and performance. The service engineer
should complete the relevant Service Record on the
Benchmark Checklist after each service.
The Benchmark Checklist may be required in the event of
any warranty work and as supporting documentation relating
to home improvements in the optional documents section
of the Home Information Pack.
5Chapter 1 | Important informationNIBE S2125
To Next Page
Loading...
Need help?
General
