Regular checks
When your heat pump is located outdoors some external
maintenance is required.
CAUTION!
Insufficient maintenance can cause serious dam-
age to S2125, which is not covered by the guaran-
tee.
CHECKING GRILLES AND BOTTOM PANEL ON
S2125
Check regularly throughout the year that the grille is not
clogged by leaves, snow or anything else.
You should be particularly vigilant during windy conditions
and/or in the event of snow, as the grille can become
blocked.
Check that the back is free from dirt and leaves.
Also check that the drain holes in the bottom panel are free
from dirt and leaves.
Regularly check that condensation is routed away correctly
through the condensation pipe. Ask your installer for assist-
ance if required.
Keep free of snow and ice
S2125 S2125
S2125
LEK
LEK
LEK
LEK
Prevent snow from building up and covering the grilles and drain holes on
S2125.
S2125 S2125
S2125
LEK
LEK
LEK
LEK
Keep free of snow and/or ice.
CLEANING THE OUTER CASING
If necessary the outer casing can be cleaned using a damp
cloth.
Care must be exercised so that the heat pump is not
scratched when cleaning. Avoid spraying water into the
grilles or the sides so that water penetrates into S2125.
Prevent S2125 coming into contact with alkaline cleaning
agents.
ACTUATING THE SAFETY VALVE (FL2)
The safety valve must be actuated regularly, to remove dirt
and to check that it is not blocked.
Remember to also check that the vent valve is working.
9Chapter 4 | Maintenance of S2125NIBE S2125
Maintenance of S2125
To Next Page
Loading...
