15VEDEX 3300
Other information
Service
■ Open the combustion chamber door (68).
■ Pull out the flame trough.
■ Empty the trough and clean the ash out. Take care to
remove any coked ash residue in the trough.
■ Clean the chamber.
■ Position the trough and close the door.
Fan
The fan is a central part of VEDEX 3300 and should be
treated with care. The fan should be removed and cleaned
about twice a year for optimum function and a long ser-
vice life.
■ Check that the boiler is off and that no embers are in
the combustion chamber.
■ Disconnect the fan from the electrical socket on the
boiler.
■ Remove the long nuts securing the fan to the boiler.
■ Clean the fan blades carefully to prevent deforming
them.
■ Reinstall the fan and connect the electrical cable.
Sweeping description
■ Remove the cover from the top of the boiler.
■ Lift out the turbulators from the convection part.
■ Sweep the convection part.
■ Reinstall the turbulators.
■ Reinstall the soot door.
Service
LEK
E
E
To Next Page
Loading...
