Nibe VVM 240 - Service Menus; Heat Pump Settings

Service menus
39
VVM 240
Menu 9.1.0 Heat pump settings
Settings concerning FIGHTER 2010 are made in the
sub-menus to this.
Heat pump settings
9.1.0
Menu 9.1.1 Compressor starts at
Degree minute setting for start of FIGHTER 2010. The
value is adjustable between -100 and 0.
-60
Compressor starts at
9.1.1
Menu 9.1.2 Number of F2010
The number of connected FIGHTER 2010s. The value
set can either be 0 or 1.
1
Number of F2010
9.1.2
Menu 9.1.3 Start defrost*
The required start temperature on the evaporator sen-
sor for defrosting of FIGHTER 2010 is set here. The
value is adjustable between -10 and +2 °C.
-3°C
Start defrost(06)
9.1.3
Menu 9.1.5 Max defrost time*
The longest time for defrosting of FIGHTER 2010 is
selected here. The value is adjustable between 5 and
12 min.
7 min
Max defrost time(09)
9.1.5
Menu 9.1.7 Powerstepup*
Outdoor air temperature, to change the power step
in
FIGHTER 2010 . The value is adjustable between 0
and 40 °C.
7°C
Powerstepup(14)
9.1.7
Menu 9.1.6 Time betw. defr*
Minimum running time, heat production before new
defrosting is permitted in FIGHTER 2010.
The value is
adjustable between 10 and 90 minutes.
50 min
Time betw. defr(10)
9.1.6
Menu 9.1.8 Drip tray heater*
Outdoor air temperature, for start of the drip tray
heater
in FIGHTER 2010 . The value is adjustable
between -2 and +2 °C.
2°C
Drip tray heater
9.1.8
Menu 9.1.4 Stop defrost*
The required stop temperature on the evaporator sen-
sor for defrosting of FIGHTER 2010 is set here. The
value is adjustable between 10 and 40 °C.
10°C
Stop defrost(07)
9.1.4
Heat pump settings
S
S
S
S
S
S
S
S
S
* The numbers in brackets denote the corresponding
channel number in FIGHTER 2010.
Menu 9.1.9 Balancetemp.*
No function
5°C
Balancetemp.(17)
9.1.9
S