Nibe VVM 300 - Changing Parameters; Example

27NIBE VVM 300
Miscellaneous
Control
Changing a parameter (value)
Access the required menu.
■
Press the enter button, the numerical value starts to ■
flash
Increase or decrease the value with the Plus/Minus but-
■
tons.
Confirm by pressing the enter button.
■
Menu 1.0 is automatically displayed again 30 minutes ■
after the last button press.
Example
Changing the Menu type, menu 8.1.1.
The starting point is menu 1.0.
■
Press the plus or minus button several times until the ■
menu displays 8.0.
Press the enter button to access menu 8.1.0.
■
Press the enter button to access menu 8.1.1. ■
Press the enter button to allow the value to be ■
changed.
The value now flashes. Change the value by pressing
■
the plus or minus buttons.
Confirm the selected value by pressing the enter but-
■
ton and the value stops flashing.
Press the minus button to move to menu 8.1.5.
■
Press the enter button to return to menu 8.1.0. ■
Press the plus button 3 times to access menu 8.4. ■
Press the enter button to return to menu 8.0. ■
Press the plus or minus button several times to access ■
menu 1.0.
Changing parameters
8.1.0
Display settings
...
...
...
8.5
Return
8.0
Other adjustments
8.1.1
Menu type
8.1.2
Language
8.1.3
Display contrast
8.1.4
Light intensity
8.1.5
Return