Caution
This menu is only visible if the installation is con-
nected to myUplink.
MENU 4.5 - AWAY MODE
In this menu, you activate/deactivate "Away mode".
When away mode is activated, the following functions are
affected:
• the setting for heating is lowered slightly
• the setting for cooling is raised slightly
• the hot water temperature is lowered if demand mode
"large” or "medium” is selected
• The AUX function "Away mode" is activated.
If you want, you can select for the following functions to be
affected:
• ventilation (accessory is required)
• hot water circulation (accessory or use of AUX is required)
MENU 4.6 -SMART ENERGY SOURCE™
NOTE
Smart Energy Source™ requires external additional
heat.
Smart Energy Source™
Alternative: on/off
Control method
Alternatives: Price per kWh / CO2
If Smart Energy Source™ is activated, VVM S320 prioritises
how/to what extent each docked energy source will be used.
Here, you can select whether the system will use the energy
source that is cheapest at the time or the one that is most
carbon dioxide neutral at the time.
Caution
Your choices in this menu affect menu 4.7 - Energy
price.
MENU 4.7 - ENERGY PRICE
Here you can use tariff control for your additional heat.
Here you can choose whether the system is to exercise
control based on the spot price, tariff control or a set price.
The setting is made for each individual energy source. Spot
price can only be used if you have an hourly tariff agreement
with your electricity supplier.
Set the lower tariff periods. It is possible to set two different
date periods per year. Within these periods, it is possible to
set up to four different periods on weekdays (Monday to
Friday) or four different periods on weekends (Saturdays
and Sundays).
MENU 4.7.1 - VARIABLE ELECTRICITY PRICE
Here you can use tariff control for the electric additional
heat.
Set the lower tariff periods. It is possible to set two different
date periods per year. Within these periods, it is possible to
set up to four different periods on weekdays (Monday to
Friday) or four different periods on weekends (Saturdays
and Sundays).
MENU 4.8 - TIME AND DATE
Set time and date, display mode and time zone here.
TIP
Time and date are set automatically if connected
to myUplink. To obtain the correct time, the time
zone must be set.
MENU 4.9 - LANGUAGE
Choose the language that you want the information to be
displayed in here.
MENU 4.10 - COUNTRY
Select here the country in which the product was installed.
This allows access to country-specific settings in your
product.
Language settings can be made regardless of this selection.
NOTE
This option locks after 24 hours, restart of display
or program updating. Afterwards, it is not possible
to change the country selected in this menu
without first replacing components in the product.
MENU 4.11 - TOOLS
Here, you can find tools for use.
MENU 4.11.1 - INSTALLER DETAILS
The installer's name and telephone number are entered in
this menu.
Afterwards, the details are visible in home screen, product
overview.
MENU 4.11.2 - SOUND WHEN PRESSING BUTTON
Setting range: on/off
Here you choose if you want to hear a sound when you press
buttons on the display.
MENU 4.11.3 - FAN DE-ICING
Setting range: on/off
Here, you set de-icing of the fan in the air/water heat pump,
if the air/water heat pump has this function.
MENU 4.11.4 - HOME SCREEN
Setting range: on/off
47Chapter 9 | Control – MenusNIBE VVM S320
To Next Page
Loading...
