EN
English – 16
by the installer and are therefore not modifiable.
– Name: used to assign a personal name to Oview , for easy identification in a de-
vice network;
– Date/time: used to set the local date and time. The arrow keys W and X (2 and
4 – fig. A) enable the user to move between the date and time fields, while keys
S and T (3 and 5 – fig. A) enable modification of the relative values;
– Display brightness: used to ad just the display brightness. This can be set with a
value from minimum 0% to maximum 100%. Note – After 30 seconds of inactivity,
the display is reduced to the minimum set value;
– Key brightness: used to adjust the key brightness. This can be set with a value
from minimum 0% to maximum 100%. Note – After 30 seconds of inactivity, the
brightness is reduced to the minimum set value;
– Oview Password: refer to paragraph “The Oview password”;
– Information: used to display the Oview technical data without the option for modi-
fication;
– Language: used to set the required language;
– Network options: this item contains the parameters “Series” and “Address”
These are used to modify the series to which Oview belongs and the personal
address of the latter.
• Programming automation functions
To access the programmable functions of an automation, in the home page (fig. B)
select “Menu” by means of key z (8 – fig. A).
In the window displayed, selection of the automation to be programmed may require
entry of a password.
• Working with the “Oview Password”
To restrict access to a number of programmable functions (for example timed set-
tings) by unauthorised personnel, e.g. strangers and children, Oview offers the
option of programming a “Oview Password”.
– To set a password: in the home page (fig. 7) select “Options” by means
of key z (7 – fig. 6) and then select “Oview Settings”. Then select “Oview
Password” and program the desired password.
Note – When password is enabled, it will be requested each time you access
the “Options” menu.
– To modify or delete an existing password: select “Options” in the
main screen. After entering the password, select “Oview Settings” and then
“Oview Password”
- program a new password and save modifications, or,
- delete the existing password leaving the dedicated space blank and save the
changes.