Nice OXI

3 - English
EN
03. Insert the receiver through the relevant opening on
the control unit.
R
L1L2L3
Close
Open
Stop/Set
Flash
Photo
Photo Test
Stop
GND
SbS
24 V
Aerial
04. Restore the power supply to the control unit.
ON
3
MEMORISING / DELETING TRANSMITTERS IN THE RECEIVER
The rstone-waytransmitter to be memorised in the receiver alsodenestheencoding system (“O-Code” or
“O-Code/A” or “FloR” or “FloR/A” or “Smilo” or “Flo”) that each successive one-way transmitter to be memo-
rised must have.
Eachsinglecodingallowsforexploitingonlythefunctionslinkedtothatspecicencodingsystem.
To verify to which encoding system the transmitters already memorised in the receiver belong, proceed as fol-
lows (Warning! – The receiver must already be connected to the control unit):