Nice Pop Series

For swing gates with leaves
up to 2 m, also with large
posts and lightweight
structures.
Version compatible with
the solar power system Solemyo.
Sophisticated electronics: slowdown,
obstacle detection system, can be linked
to the 8.2 KOhm resistive sensitive edge.
User-friendly: release with personalised
key designed.
Sturdy, aluminium, anti-shearing arm.
Always ready for use: continues to work
even during power failures using optional
(PS124) batteries that fit inside the motor.
Exclusive functions: photo-test,
pedestrian gate, programmable input
for functions such as open, close,
photo2, open pedestrian and open partially.
Extra-small, shockproof body
with aluminium base.
Max.
Max. 250 mm
Min. 500 mm (90°)
Technical specifications
Power (Vac 50 Hz)
Emergency power supply
Current absorbed (line) (A)
Power absorbed (W)
Protection level (IP)
Torque (Nm)
Speed (Rpm)
Opening time (s)
Working temp. (°C Min/Max)
Insulation class
Work cycle (%)
Dimension (mm)
Weight (kg)
* version without control unit
230 -
PS124
~1 3
75
44
180
1.26-1.68
10
-20 ÷ +50
1B
30
167x315x254
21.6
PP7024 PP7224*
1 1,5 2
250
200
Max. gate length (m)
Max. gate weight (kg)
The shape, the height of the gate
and the weather conditions
can considerably reduce the values
shown in the graph to the side.
Dimensions
Utilisation limits
PopKit
167 mm
545
315
254
20 SYSTEMS FOR SWING GATES KIT PRICES 2010

Nice Pop Series Specifications

General

Brand	Nice
Model	Pop Series
Category	Gate Opener
Language	English

Summary

General Safety Warnings and Precautions

1 Product Description

2 Installation

2.1 Preliminary Checks for Installation

Ensure the gate is suitable and safe for automation installation.

2.2 Product Application Limits

Specifies the limits and compatibility of the product for use.

2.3 Electrical Connections

Details on how to connect the system's electrical components.

2.4 Initial Start-Up and Electrical Connections

Steps for initial setup and connecting power and other devices.

2.5 Automatic Limit Switch Search

Procedure to automatically detect gate limit switch positions.

3 Testing and Commissioning

3.1 Testing

Procedures for testing the automation system for safety and functionality.

4 Diagnostics

5 Programming

5.1 Preset functions

Overview of default programmable functions.

5.2 Programmable functions

Details on how to customize system functions.

5.2.1 Direct programming

Method for directly programming system functions.

5.2.2 Level one programming: part one

First part of level one programming for functions.

5.2.3 First level programming: second part

Second part of level one programming for functions.

5.2.4 Second level functions

Description of functions available at the second programming level.

5.3 Programming

Steps and methods for programming the control unit.

5.3.1 Level one programming: functions

How to enable or disable functions at level one.

5.3.2 Level two programming: parameters

How to select and set parameters at level two.

5.3.3 Memory deletion

Procedure for deleting all programmed settings.

5.3.4 Example of level one programming

Demonstrates programming specific functions at level one.

5.3.5 Example of level two programming

Demonstrates modifying parameters at level two.

5.3.6 - Programming diagram

Visual guide to the programming functions and parameters.

6 Further Details: Accessories

6.1 Connecting a Radio Receiver

How to connect a compatible radio receiver.

6.2 Connecting Model PS124 Buffer Battery

Instructions for connecting the PS124 buffer battery.

6.3 Connecting the Solemyo System

Guide for connecting the Solemyo photovoltaic system.

7 Troubleshooting

8 Product Maintenance

Disposal of the Product

Procedures for environmentally sound disposal of the product.

Technical Characteristics of the Product

EC Declaration of Conformity