Nice Wingo

gearmotor
for swing gates
wingo
Istruzioni e avvertenze per l’installatore
Instructions and warnings for the fitter
Instructions et recommandations pour l’installation
Anweisungen und hinweise für den installateur
Instrucciones j advertencias para el instalador
Instrukcja dla instalatora

Nice Wingo Specifications

General

Protection Level	IP44
Protection Rating	IP44
Power Supply	230V AC
Operating Voltage	230 V
Opening Speed	15s
Closing Speed	15s
Safety Features	Obstacle detection

Summary

Product Description

Installation

Preliminary Checks

Check gate suitability, balance, smooth movement, and safe motor fitting area.

Limits of Use

Gate shape, height, and weather conditions affect operational limits.

Assembly

Key points for correct system assembly including projection, angle, speed, and thrust.

Fitting the Front Bracket

Instructions for attaching the front bracket to the gate for proper motor operation.

Opening the Gate Outwards

Procedure for adjusting bracket length if the gate opens outwards beyond a certain dimension.

Typical System Layout

Diagram illustrating the placement of WINGO actuators and associated components in a gate system.

Connecting the Gear Motor

Electrical connection guide for the WINGO gear motor to the terminal board and control unit.

Manual Manoeuvre or Release

Testing

Maintenance

Disposal

Guidelines for environmentally compliant disposal of WINGO system materials.

Technical Specifications

Models and Characteristics

Table detailing technical data for WG4000 and WG4000/V1 models.