Need help?Do you have a question about the Nice Wingo4024 and is the answer not in the manual?
General| Model | Wingo4024 |
|---|---|
| Power Supply | 230V AC |
| Max. Current Draw | 5 A |
| Power | 300W |
| Opening Time | 20s |
| Protection Class/Level/Rating | IP44 |
| Operating Temperature | -20°C to +50°C |
| Safety Features | Obstacle detection |
Contains important instructions and warnings for personal safety during installation and use.
Provides critical warnings and precautions to be observed before and during the installation process.
Checks the integrity of components, model suitability, and environmental factors before commencing installation.
Assesses if the gate's mechanical structure and environment are suitable for automation.
Verifies the gate leaf's size and weight against specified limits before installation.
Shows an example of an automation system layout and component positioning for typical installation.
Covers the process of installing the fixing brackets and the gear motor onto them.
Details the process of calculating and installing the rear fixing bracket using provided graphs.
Explains how to position and fix the front bracket onto the gate leaf.
Describes the steps for mounting the gear motor onto the previously installed brackets.
Details how to set the mechanical limit switch for precise gate leaf stop positions.
Details the inspection of each component for safety and compliance with regulations.
Outlines the final steps for putting the automation into operation after successful inspection.
Lists routine maintenance tasks to ensure safety and longevity of the automation system.
Details the procedure for manually unblocking and blocking the gear motor during power failures or anomalies.
To Next Page
